g•option
« SPOT Satellite Messanger | Main | Blue Max Chair »

Friday, January 23, 2009

Audio mixer

Using some plans posted on the FJR Forum, I built an audio mixer using some parts from Radio Shack. The mixer uses resistors to allow two audio input to mix into a single audio output.

I ran cables under the tank and seat, from both my Zumo mount and from the right side of handlebar where my V-1 mounts. A small coiled M-F audio cable attaches to the output jack of the mixer, and pokes out a few inches between the seat and the tank. I run my headphone cord inside my jacket, and plug in to the female jack down by the tank. There's plenty of slack, so I can stand on the pegs without a problem.

Posted by bnc at January 23, 2009 5:02 PM